Table of Contents
Advertisement
Nesis III User's Manual
Settings opens a window, where access to further settings like flap positions,
trim sensitivitym, properller pitch, special recorders, video input, serial
ports, backup and restore, etc..
Layout is used to start screen editing (limited to engine part on Modern
screens) and to define various screen options.
Parameters is used to define engine, flight and other parameter details like
their names, green, yellow and red limits, responce times and other
parameter specific attributes.
AHRS Level is used to set the level position of the AD-AHRS-GPS module.
Engine opens window for the EMS device. Channels and sensors are config-
ured here.
Tank is used for tank calibration.
Offset allows various sensor and counter adjustments.
Autopilot is access point to several autopilot configuration windows. A sep-
arate document was prepared for autopilot installation and settings.
Please see the Autopilot Installation Manual.
Special Special functions allows you to enter various passwords which affect
Nesis behavior. To prevent unwanted changes, do not use this function
unless we instructed you to do so. Most passwords are given to the
customers on a need-to-know basis.
CAN devices lists devices found on CAN bus and allows to perform some
special operations on them.
Joyu is used to assign commands to the Joyu command stick.
Boxi is used to configure Boxi box used to drive trims, radio or some other
external motor or relay. Boxi often works together with Joyu.
Engine Log is similar to the logbook, but it shows logs based on the engine
time. It also detects shorter test engine runs on the ground, which are
normally ignored by the logbook. This is useful for service and testing
purposes. When an item is selected, it is copied to an USB memory
stick in the tab format. See section 7.2.2 for more details.
CAS Correct is used to enter the calibration airspeed corrections. Please
refer to the Installation manual for more details.
User brings back the User Options screen.
109
9.2 Icons
© Kanardia 2018-2022
Advertisement
Table of Contents
