Table of Contents
Advertisement
Nesis III User's Manual
OFM Transit This option toggles transit routes defined in the OFM database.
The transit routes are typically used to define a way trough TMA into
CTR or into CTR holding.
OFM Holding This option toggles the holding patterns.
OFM Traffic Circuit This option toggles the traffic circuits.
OFM Arrival This option toggles the arrival route. They typically define a
route into traffic pattern.
OFM Departure This option toggle the departure route.
3.8.4
Airspace Filter
Airspace zones appearance can also be tuned. Airspace structure can be quite
complex and it can be difficult to understand in a top down view. In order
to improve readability, some airspace zones can be filtered out. Figure 13
illustrates an example if airspace filter.
The following options are available:
Hide FIR When enabled, this option hides all airspace zones with the FIR
attribute.
Hide all zones above unconditionally hides all zones, which bottom starts
above specified value. Use this to hide some (typically A and B class)
airspace zones, which are mostly used by IFR only traffic. For example,
if you never fly above 8000 feet, you can set this value at 10000 feet.
Figure 12: The Map layers window.
34
3.8 Weather Overlay
© Kanardia 2018-2022
Advertisement
Table of Contents
