Pilots - Kanardia Nesis III User Manual

Nesis III User's Manual

8.4 Pilots

8.4 Pilots
When several people are flying an aircraft, pilots and instructors can specified.
When more that one pilot is given, Nesis ask for its name on the startup and
when at least one instructor is given, Nesis also asks for an instructor. Pilot
and instructor names are automatically recorded, when takeoff conditions are
detected and they will show in the logbook.
Figure 8.4 shown an example of one instructor and three pilots. A check over
an icon means that this pilot/instructor is currently active.
Only one pilot can be active at the time. In addition, one instructor can be
also active. An instructor can appear in two roles as a pilot or as an instructor.
Figure 70: An example of window used to edit pilots.
Adding a Pilot
Select the New command in order to enter new pilot or instructor. A window
appears and it ask to select between a pilot or an instructor. After this, enter
a new pilot or instructor name.
Editing a Pilot
First select a pilot or an instructor name from a list. A command window
appears. Select Edit from the list. Next, select class.
Note that a pilot name can't be edited. If a mistake was made, delete a name
from the list and create a new one.
Deleting a Pilot
First select a pilot or an instructor name from a list. From a command window
select Delete and name will be removed from the list.
© Kanardia 2018-2022
96