Selecting A Waypoint - Kanardia Nesis III User Manual

Nesis III User's Manual
4.4

Selecting a Waypoint

Nesis maintains separate lists of airfields, navigation aids
6
points and user points. Thus selection of a waypoint is a two step process.
In the first waypoint type is selected – Figure 32 left. In the second step
actual waypoint is selected, Figure right.
Figure 32: Waypoint options (left) and list of waypoints with active name
filter (right).
First Step
The following options are available in the first step:
Deactivate This option is visible only if some waypoint was previously made
active. It will deactivate navigation mode.
Airport Displays only airports and those user waypoints that were classified
as airports.
5
By the navigation aid we mean VORs, NDBs, ILSes, TACANs and other similar radio
navigation aids, which locations are often used in VFR flight for the navigation.
6
In Europe, VFR reporting points are more and more used in VFR flights to define the
flying routes and entry/exit points in airspace zones.
4.4 Selecting a Waypoint
52
5
, VFR reporting
© Kanardia 2018-2022