Table of Contents
Advertisement
Nesis III User's Manual
External long When connected, it is typically used to re-activate autopilot.
The following actions can be assigned to each of the buttons mentioned before.
Note that some actions require additional equipment to be connected to the
CAN bus to be operational.
• Not used means that this shortcut is not in use. Autopilot menu is a
shortcut to the Nesis autopilot menu. See section 12.8 on page 119.
• Autopilot level is a shortcut to the autopilot level command.
• Autopilot disable is a shortcut to the autopilot disable command.
• Logbook is a shortcut to logbook actions.
• Settings is a shortcut to the user options page.
• Near airfields is a shortcut to the list of nearest airfields.
• Waypoints is a shortcut to the waypoint selection window.
• User Wayppoints is a shortcut to user waypoint selection window.
• Set marker is a shortcut to the marker setting command.
• Home screen is a shortcut to the default (home) screen.
• Alarms is a shortcut to the alarms window.
• Video resize enlarges or shrinks the video subwindow.
• Next page switches to the next page – same as pager button.
8.3.2
Units
Nesis uses several units for different physical quantities like distance, velocity,
mass, volume, etc. Table 9 shows available units. The quantities are grouped
according to their function.
88
8.3 Settings
© Kanardia 2018-2022
Advertisement
Table of Contents
