Table of Contents
Advertisement
Nesis III User's Manual
2. Copy the downloaded files to the USB memory stick. Do not forget to
use safe remove option before removing the stick form PC.
3. Start Nesis and insert the USB stick. Switch to the Options page and
select the Map icon.
4. Select the Copy from USB|Vector item and then select a country with
ras extension from the stick. This start the copy process. Repeat this
until all high resolution country files are copied.
5. Close all windows and Nesis will restart and new files will become active.
13.3
Raster Maps
Raster maps are complete maps in a form of an image usually prepared by
professional organizations. The advantage of raster map is in the fact that fi-
nal map optimization is done by human beings, which makes maps much more
alike the paper map. In many cases, raster maps are nothing but electronic
versions of paper maps.
Some of these maps may be obtained only under license and some of them
are freely available.
Typically, these maps are provided as a file with tiff, jpg, png, bmp pdf or
similar raster image extension. The most suitable format is tiff with integrated
geo-referenced information – so called geotiff.
We use special software to convert one of these formats into a format optimized
for Nesis and Emsis. Typical extension of our format is ras.
Some of our ras files are copy protected and they will be visible only when
proper license file is also installed. This license file has lic extension.
13.3.1
DFS
We obtain DFS – Deutsche Flugsicherung maps from R. Eisenschmidt GmbH
– www.eisenschmidt.aero. We convert these maps into ras format that is
optimized for Nesis and also Emsis. The maps can be downloaded from our
web site. Figure 93 shows coverage of DFS maps.
All DFS are licensed maps. You can download the ras files from our web
page and install them on Nesis, but they will not be displayed on Nesis screen
unless proper license file is purchased from us and copied.
126
13.3 Raster Maps
© Kanardia 2018-2022
Advertisement
Table of Contents
