Flarm And Ads-B Receivers - Kanardia Nesis III User Manual

Nesis III User's Manual
5

Flarm and ADS-B Receivers

Nesis can be connected with some Flarm and ADS-B receivers. In general,
any Flarm compatible device can be connected, however it was tested only
with:
• Power Flarm Core – produced by Flarm Technology Ltd.,
• TRX 1500 – produced by Garrecht Avionik GmbH.
• AT-1 - AIR Traffic – produced by Air avionics.
In this section, we will use term Flarm device or simply device for any of
above mentioned products.
This section does not explain any Flarm working principles. There are several
documents and information sources available on Flarm official web site. We
strongly recommend that you read them before you connect your Flarm device
to our system:
• Please study the Nesis installation and any other manuals that you
received with your device. The device manual information supersedes
any conflicting information in this manual.
• Please, make sure that you understand the working principle of the
device.
• Please visit https://flarm.com/ and study documents found on this
site. Specifically check the SUPPORT section, where you can find man-
uals and firmware updates.
• For TRX and AT-1 devices, visit https://www.air-avionics.com and
check the SUPPORT section for manuals and firmware updates.
• Update device with the latest firmware (software). Devices must be
updated every year or they will stop working. Kanardia has nothing to
do with this unusual demand.
• Devices are sometimes shipped with obsolete firmware. Update the
device with the latest firmware version before installation.
• Please, also read the FAQ sub-section on the Flarm site. If can be found
under SUPPORT section.
5. Flarm and ADS-B Receivers
64
© Kanardia 2018-2022