Table of Contents
Advertisement
Nesis III User's Manual
like USA.kus can't be downloaded and a copy procedure must be used
instead. Please also note these files are quite large and transfer fees
from your GSM provider may occur.
Map info lists map files loaded into Nesis, Figure 79. It does not list any
system map files. The raster files list shows map name, date of map
creation, map file name, map type and size.
Vector maps can't be deleted. Nesis only lists the country names that
were loaded into the system.
Raster displays raster maps in the system. A selected raster map can
be removed with the Delete command. After removal, Nesis must
restart.
Approach displays approach maps in the system. A selected map can be
deleted from the system using the Delete command or simply turned
off/on using the Disable/Enable command.
Format is a very powerful command and normally it should never be used. It
will reformat internal disk section. This section stores maps. This effec-
tively deletes all maps – system maps and raster maps. The command
can't be revoked.
8.11.1
When Copy Fails
Copying might fail. When it happens, an error message is displayed after
the verification process has been completed. The most probable cause is a
corrupted file on the USB memory stick. Download the file again and make
sure to use Safe remove command before removing USB memory stick from
PC. Then try again.
8.12
Update
The Update icon starts system software update. It asks for a confirmation
and when confirmed, restarts Nesis in special update mode. More details are
given in section 10 starting on page 110.
104
8.12 Update
© Kanardia 2018-2022
Advertisement
Table of Contents
