Table of Contents
Advertisement
Nesis III User's Manual
8.8
Compass
The Compass icon opens a window for the calibration of optional electronic
compass device called MAGU. The window is opened only when Magu was
detected on the CAN bus.
Due to complexity of MAGU installation and calibration the details are ex-
plained in the MAGU Manual. Please refer to our web site and download the
manual.
8.9
ADSB/Flarm
The ADSB/Flarm icon is used to set various Flarm/ADSB settings. The
details are covered in section 5.4 starting on page 69.
8.10
Waypoints
The Waypoints icon is used to add and edit user specific waypoints. Figure 74
shows a window that appears. The top part list commands and the bottom
part list all user waypoints.
Figure 74: An example of user waypoint window.
8.10.1
New Waypoint
The New command is used to create a new user waypoint. First Nesis asks for
a waypoint name and once the name is given, it asks for the details. Figure
75 shows an example.
100
8.8 Compass
© Kanardia 2018-2022
Advertisement
Table of Contents
