Nesis III User's Manual
11.1.3
Performing the Update
Once the file is on the USB stick follow the steps below:
1. Insert the USB stick with the update file into Nesis USB port.
2. Select Options from the main menu and then select the Map icon
3. Select the Copy from USB option.
4. Select the Vectors option.
5. Search for the Avio-XXXX.kus file and select it. Nesis will copy the
databases.
6. Wait for copy to finish and then close all windows.
Nesis will restart with new databases being active.
11.2
Update with WiFi
When Nesis is equipped with WiFi dongle and Internet access is available,
the database can be updated online.
1. Select Options from the main menu and then select the Map icon
2. Select the Download option,
3. Select Database.
4. Search for the Avio-XXXX.kus file and select it. Nesis will copy the
databases.
5. Wait for copy to finish and then close all windows.
12
Autopilot
When Nesis system is extended with one or two servo motors, than Nesis can
be also used as an autopilot controlling device. In general, no other electronics,
but servos is needed. This section describes basic operations with autopilot
system.
11.2 Update with WiFi
116
© Kanardia 2018-2022