Table of Contents
Advertisement
Nesis III User's Manual
4. Select the Copy from USB|Raster items and search for the raster file
to copy from the USB memory stick.
5. The copy process starts. Fist the file's signature (integrity) is checked
and if all is well, the file is copied.
6. Close all windows. Nesis will reboot and system will use raster file
automatically.
Some raster files are protected with a special license file, which binds the
raster file with a serial number of the instrument. In this case, you have to
install the license file as well. License files have lic extension. A license file
is copied in the same way as the raster file.
If integrity check fails, the file is not copied. The cause of the failure is usually
linked to coping from PC to USB-stick. The stick was removed from PC too
quickly. Repeat the whole procedure once again starting with downloading
from the server.
13.4
Installing Approach Maps
Nesis can also show approach maps as an transparent overlay. These maps are
not downloadable from our web site due to copyright restrictions. However
we prepared a desktop up, which allows users to create their own approach
maps. The app and manual can be obtained from our web site. See also
section 3.8.1.
The approach maps have nam extension.
1. Once an approach map is prepared with the Approacher app, copy the
nam file to an USB memory stick.
2. Insert the stick into Nesis, switch to the Options page and select the
Maps|Approach items.
3. Select the file. This will copy the file into Nesis.
4. Close all windows. After restart maps will be used automatically.
14
Third Party Software
This section has nothing to do with the usage of the Nesis. You can skip
it completely if you are not interested in software development and licensing
issues.
13.4 Installing Approach Maps
130
© Kanardia 2018-2022
Advertisement
Table of Contents
