Service - Kanardia Nesis III User Manual

Nesis III User's Manual
• 2D fix is shown when a position is known, but precision is limited.
• 3D fix is shown when a position is known and enough satellites
are visible for a good fix.
• 3D+SBAS is shown when a position is also augmented with SBAS
system – highest precision.
Figure 81: An example of GNSS details. The example shows bad satellite
distribution and relatively weak signals.
Counters section lists three internal counters:
• Engine total time – total time of engine running.
• Flight total time – total time of aircraft being airborne.
• Power-on total time – total time of Nesis being powered on.
CAN devices section lists all devices detected on the CAN bus.
8.15

Service

The Service icon is entry point to protected Service Options section. It re-
quires a special password. This password is unique for each Nesis. It can be
found under Service pass item on the info window. See section 8.14.
Additionally, this password is also written on the warranty card, that comes
with each Nesis.
107
8.15 Service
© Kanardia 2018-2022