Route - Kanardia Nesis III User Manual

Nesis III User's Manual
Figure 33: An example of the details window for LJMB airfield.
Frequencies section lists frequencies associated with the waypoint, when
available. When radio is connected with Nesis, a selection of frequency
will transfer it into the radio. The selected frequency will be set as a
standby frequency.
Runways section lists runways available on this airfield.
Weather section is available when Nesis is connected to the Internet. METAR
reports are shown. In addition, when the METAR report is selected,
a new window is opened, where the METAR report is interpreted in
a more friendly form. For an example, see Figure 34. Full METAR
report is shown on the top and the interpreted part below. Note that
we try to interpret as much as possible, but some parts may be too
difficult to handle.
4.5

Route

This section describes how to activate and manipulate a route. The route
functions are accessed via the Route command from the main menu. Depend-
ing on the current situation two different windows are opened:
54
4.5 Route
© Kanardia 2018-2022