Inmail Station Mailbox Options - NEC SL100 Programming Manual

ISSUE 1.1
Level
IN
Description
Use Program 47-02 : InMail Station Mailbox Options to set up a station/extension mailbox. Station
mailboxes are automatically assigned as Subscriber Mailboxes. Normally, InMail Station Mailbox num-
bers 1 ~ 64 should correspond to extensions 200~263.
Station Mailboxes are one of three mailbox categories: Station, Routing, or Master. You can also set up
Master Mailboxes as Subscriber Mailboxes.
Input Data
Station Mailbox Number
Item No.
01 Mailbox Type
Use this option to enable or disable the mailbox. An
extension mailbox is not accessible when it is dis-
abled (even though its stored messages and con-
figuration are retained in memory.) If disabled, a
user pressing Message initiates a remote logon and
is asked to enter their mailbox number. A voice
prompt then announces: "That mailbox does not
exist."
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 200.
02 Mailbox Number
Use this option to select the extension number asso-
ciated with the mailbox you are programming. Nor-
mally, mailbox 1 should use Mailbox Number 200,
mailbox 2 should use Mailbox Number 201, 101 etc.
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 200.
03 Number of Messages
Use this option to set the maximum number of mes-
sages that can be left in the Subscriber Mailbox. If a
caller tries to leave a message after this limit is
reached, they hear : "That mailbox is full." InMail
then hangs up.
04 Message Playback Order
Use this option to set the Subscriber Mailbox mes-
sage playback order. When a subscriber listens to
their messages, InMail can play the oldest mes-
sages first (first-in/first-out, or FIFO), or the newest
messages first (last-in/first-out, or LIFO).
05 Auto Erase/Save of Messages
Use this option to determine what happens when a
Subscriber Mailbox user completely listens to a new
message and then exits the mailbox without either
saving (SA) or erasing (E) the message. Depending
on the setting of this option, InMail either automati-
cally saves or erases the message. If the mailbox
user hangs up before listening to the entire new
message, InMail retains the message as a new
message.
Programming Manual

47-02 : InMail Station Mailbox Options

Item
0 = None
1 = Personal
2 = Group
Up to four digits
0 ~ 99 messages
To conserve storage space,
enter 0 for all unused mail-
boxes.
0 (FIFO = first-in/ first-out, or
oldest messages first).
1 (LIFO = last-in/ first-out, or
newest messages first)
0 = Erase
After the subscriber listens to
the entire new message and
hangs up, InMail erases the
message.
1 = Save
After the subscriber listens to
the entire new message and
hangs up, InMail saves the
message.
Program 47 : InMail
001 ~ 128
Input Data
Mailbox 1 ~ 64 : 1
Mailbox 65 ~ : 0
Mailbox 1 = 200
Mailbox 2 ~ 64 = 201
Mailbox 65 ~ = No set-
Mailbox 1 = 99
Mailbox 2 ~ = 20
SL1000
Program
47
Default
~263
ting
0
1
2-373