Table of Contents
Advertisement
3. Leaving the 2K liquid cooling pump in the projector, remove the plug from the reservoir's cap.
4. Tape the plug to the top of the cap so it is available for reinsertion if the projector is to be
transported in the future.
Alternatively, order a new plug in the Reservoir Cap service kit (P/N: 003-200638-XX).
5. Replace the rear lower cover.
Christie Eclipse Installation and Setup Guide
020-103331-01 Rev. 1 (04-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
Installation and setup
33
Advertisement
Table of Contents
