Removing The Reservoir Plug - Christie Eclipse Installation And Setup Manual

7. Secure the zoom motor cover to the zoom motor with two screws.
8. Align the illumination optical subsystem (IOS) 1 mirror.
For details, see the Aligning the illumination optical subsystem (IOS) 1 mirror instruction sheet
(P/N: 020-103619-XX).

Removing the reservoir plug

Prior to using the projector, remove the plug from the reservoir assembly.
1. To access the 2K liquid cooling pump, remove the rear lower cover:
a) Remove the three screws along the top of the rear lower cover.
Christie Eclipse Installation and Setup Guide
020-103331-01 Rev. 1 (04-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Installation and setup
31