Korg Triton Studio Parameter Manual page 174

22) Load .KSC:
The .KMP files and .KSF files listed in the .KSC file will be
loaded as multisamples and samples respectively.
The .KMP files and .KSF files listed in the .KSC file
are saved in a directory of the same name that is cre-
ated automatically at the same time as the .KSC file.
1 "Select .KSC Allocation" allows you to specify how the
multisamples and samples in the .KSC file will be loaded.
Append: The data will be loaded into the numbers after
the last multisample or sample number currently existing
in sample memory (RAM) (i.e., that were previously
sampled or loaded). In this case, only the valid multisam-
ples and samples will be packed and loaded. ( p.158
".KSC Allocation" diagram)
If "Load ******** .PCG too" is checked when you load the
data, programs within the .PCG file that use multisam-
ples from the .KSC file will automatically have the multi-
sample settings for their oscillators rewritten so that each
program uses the correct multisample. Drum kits in the
.PCG file that use samples from the .KSC file will auto-
matically have the sample settings for the drum kit
rewritten so that the drum kit uses the correct samples.
Clear: All multisamples and samples currently existing
in sample memory (RAM) will be cleared, and the multi-
samples and samples will be loaded in the same configu-
ration as when they were saved ( p.158 ".KSC
Allocation" diagram).
Choose "Append" if sample memory (RAM) already
contains multisamples and samples that you do not want
to erase, and you would like to load additional multisam-
ples and samples from media.
Choose "Clear" if you want to reproduce the state in
which the data had been saved, for example immediately
after power-on.
2 If the current directory contains a .PCG file or .SNG file of
the same filename, you will be able to select the "Load
******** .PCG too" and/or "Load ******** .SNG too" check-
boxes.
"Load .PCG: 1 "
• If you check "Load ******** .PCG too," the .PCG file of
the same name as the .KSC file will also be loaded.
"Load .PCG: 2 "
• If you check "Load ******** .SNG too," the .SNG file of
the same name as the .KSC file will also be loaded.
"Load .PCG: 3 "
3 To load the data, press the OK button. To cancel without
loading, press the Cancel button.
If the .KSF files used by the .KMP file are not in the cur-
rent directory or below it, a dialog box will appear, allow-
ing you to specify the directory. Use the procedure "If a
file to be loaded cannot be found,..." ( p.157) to load the
required .KSF files.
Since overflow checking of sample memory (RAM) is
performed when loading each individual .KSF file, it is
possible that an overflow may occur in the middle of
the loading process.
selected icon 23) Load .KMP:
The selected .KMP file will be loaded as a multisample. The
.KSF files used by the .KMP will also be loaded as samples.
1 To load the data, press the OK button. To cancel without
loading, press the Cancel button.
Samples will be loaded starting at the first unoccupied
number following the last multisample or sample that
currently exists in the sample memory. Only valid multi-
samples or samples will be packed and loaded (Append
load).
If the .KSF files used by the .KMP file are not in the cur-
rent directory or below it, a dialog box will appear, allow-
ing you to specify the directory. Use the procedure "If a
file to be loaded cannot be found,..." ( p.157) to load the
required .KSF files.
Since sample memory (RAM) overflow checking is per-
formed when loading each .KSF file, an overflow may
occur during the loading process.
24) Load .KSF:
The selected .KSF file will be loaded as a sample.
1 To load the data, press the OK button. To cancel without
loading, press the Cancel button.
The sample will be loaded after the last multisample or
sample that currently exists in the sample memory
(RAM) (Append load).
Loading AIFF files and WAVE files
The TRITON STUDIO can load AIFF format or WAVE for-
mat files, which are formats used to save audio data on per-
sonal computers etc. The loaded data can be used as a
sample. When this data that has been loaded, it can be used
as a sample or a drumsample.
25) Load .AIF:
The selected AIFF file will be loaded as a sample.
1 To load the data, press the OK button. To cancel without
loading, press the Cancel button.
The sample will be loaded after the last sample that cur-
rently exists in the sample memory (RAM) (Append
load).
You can load multiple files within the directory.
( p.162)
The .KSF files used by the .KMP file will be saved in
an identically-named directory that is created auto-
matically when the .KMP file is created.
selected icon
selected icon
selected icon
163