Korg Triton Studio Parameter Manual page 83

Track 1
1 (4/4)
Before Insert
1 (4/4)
Track 2
Insert two measures
1 (4/4)
Track 2
After Insert
Track 1 1 (4/4)
Measures 4 and 5 will use the previously specified
time signature.
1 (4/4)
Track 1
Before Insert
1 (4/4)
Track 2
Insert two measures
1 (4/4)
Track 2
After Insert
1 (4/4)
Track 1
Measures 2 and 3 will be 7/8, and measures 4 and 5
will be the previously specified time signature.
5–1I: Repeat Measure
This command repeatedly inserts the specified measures for
the specified number of times. When you execute the Repeat
Measure command, the measures will be inserted following
the measure specified by "To End of Measure," and musical
data following the inserted data will be moved backward. It
is convenient to use this command when you have a song
that you playback with "Track Play Loop" (0–5a/6a) turned
on, and wish to expand it into musical data.
1 Use "Track Select" to select the track whose measures
you wish to repeat.
2 Select "Repeat Measure" to access the dialog box.
3 In "From Measure" and "To End of Measure," specify
the range of measures that will be repeated. (By default,
"From Measure" and "To End of Measure" will be set to
the range you specified in the Track Edit page.)
4 In "Times," specify the number of repetitions. For exam-
ple if you set "From Measure" to 001, "To End of Mea-
sure" to 004, and "Times" to 2, the musical data of
measures 1–4 will be inserted into measures 5–8. The
result will be that measures 1–4 will be played twice.
5 If you wish to repeat the musical data of all tracks includ-
ing the master track, check "All Tracks."
6 To execute the Repeat Measure command, press the OK
button. To cancel, press the Cancel button.
If you execute the Repeat Measure operation on measures 1–4 with "Time" = 2,
measures 1–4 will be inserted into measures 5–8.
Before
Repeat
Track 1
1 2
Measure
After
Repeat
Track 1 1 2
Measure
72
Time signature = **/**
2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
Time signature = 7/8
2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
2 (4/4) 3 (3/4) 4 (5/4) 5 (2/4)
2 (7/8) 3 (7/8) 4 (5/4) 5 (2/4)
2 (7/8) 3 (7/8) 4 (5/4) 5 (2/4)
3 4 5 6
3 4 1 2 3 4 5
5–1J: Copy Measure
This command copies the measures of musical data speci-
fied as the "From" source to the begining of the measure
specified as the "To" location.
When you execute the Copy Measure command, the exist-
ing track data at the copy destination will be rewritten.
1 Select the copy source song.
2 Select "Copy Measure" to access the dialog box.
3 In From: "Track," select the copy source track. (By
default, this will be the track you selected in "Track
Select.")
If you check "All Tracks," the musical data of all tracks
including the master track will be copied.
4 In "From Measure" and "To End of Measure," specify
the range of copy source measures. (By default, "From
Measure" and "To End of Measure" will be the range that
you specified in the Track Edit page.)
5 In "To: Song," specify the copy destination song. In
"Track" (when "All Tracks" is unchecked) specify the
copy destination track. In "Measure," specify the first
measure where the copied measures will be inserted.
6 To execute the Copy Measure operation, press the OK
button. To cancel, press the Cancel button.
Example: When you copy measures 5–7 of track 1 to the third measure of track 2,
measures 3–5 of track 2 will be rewritten.
Track 1
1 (4/4)
(source)
Track 2
1 (4/4)
(destination)
5–1K: Move Measure
This command moves measures of musical data to a speci-
fied destination. When you execute the Move Measure com-
mand, musical data following the move source will be
moved forward according to the number of measures
moved, and musical data following the move destination
will be moved backward correspondingly.
1 Select "Move Measure" to access the dialog box.
2 In From: "Track," select the move source track. (By
default, this will be the track you selected in "Track
Select.")
If you check "All Tracks," musical data of all tracks
including the master track will be moved.
3 In "From Measure" and "To End of Measure," specify
the range of measures that will be moved. (By default,
6
"From Measure" and "To End of Measure" will be the
range that you specified in the Track Edit page.)
4 In "To: Track" (if "All Tracks" is unchecked), specify the
move destination track. In "Measure," specify the first
measure of the move destination.
5 To execute the Move Measure command, press the OK
button. To cancel, press the Cancel button.
2 (4/4) 3 (4/4) 4 (3/4) 5 (3/4)
2 (4/4) 3 (4/4) 4 (3/4) 5 (3/4)
6 (3/4) 7 (4/4)
6 (3/4) 7 (4/4)