Korg Triton Studio Parameter Manual page 135

Program Select (Bank/Program)
[INT-A...INT-F, G, g(1)...g(9), g(d), EXB-A...EXB-G]
Selects the program that will be used by each track.
The lower line will display part of the program name.
If "Program Select" is selected, you can use the BANK [INT-
A]–[EXB-G] keys and the VALUE controller to select the pro-
gram.
When you press the popup button, the Bank/Track Program
menu will appear, allowing you to select a program. ( Pro-
gram P0:0–1a)
If "Program Select" is selected, the BANK key LED will
light to indicate the program bank of the selected track.
Bank INT-F can be selected if the EXB-MOSS option is
installed. When this is installed, you will be able to use
128 special EXB-MOSS programs.
If "Status" (1–1a/2a) is either INT or BTH, you can
select a program by receiving a MIDI program change.
MIDI channels 1–16 will control tracks 1–16 respectively.
PLAY/MUTE
This sets the playback/mute status of each track.
The setting will alternate each time you press the PLAY/
MUTE button.
PLAY: The track will play.
MUTE: The track will be muted.
SOLO ON/OFF
Switches the Solo function on/off. Only the track set to
SOLO ON will be heard. All other tracks will be muted.
If a track muted by the Mute or Solo function has a
"Status" (1–1a/2a) of EXT or BTH, the MIDI note-on/
off messages of that track will not be transmitted.
(However, the track selected by "Play (Track Select)"
(0–1a) is an exception.)
If the page menu command "Solo Selected Track" (0–
1B) is ON, its solo settings will take priority (when ON).
When you press "SOLO ON/OFF" or press a parame-
ter of another track, only that track will be soloed and
will sound.
GM Initialize Parameter
Parameter
P0 Bank/Program
Pan
Volume
P1 Status
Use Program's Scale
P7 Arpeggiator Assign
Other Arpeggiator parameters
P8 IFX/Indiv.Out BUS Select
Send1(MFX1)
Send2(MFX2)
IFX1–5
Pan(CC#8)
BUS Select
Send1
Send2
Other Insert Effect parameters
P9 MFX1
MFX2
Return1
Return2
Other Master Effect and Master EQ parameters
124
[PLAY, MUTE]
[SOLO OFF, SOLO ON]
Track1–9, 11–16
G001:Acoustic Piano
C064
100
–
–
–
–
L/R
0
40
–
–
–
–
–
–
–
–
–
–
–
M 0–1: Page Menu Command
0–1A: GM Initialize
This command transmits a GM System On message to Song
Play mode, resetting all tracks to the GM settings ( table
below).
In Song Play mode when a GM System On message is
received from an external device or if the SMF contains
a GM System On message, the tone generator will be
reset to the GM settings in the same way as when this
command is executed (However even in these cases, the
parameters of the P9: Master Effect will not be reset).
0–1B: Solo Selected Track
This command switches the solo function on and off. When
switch on, only the selected track will sound and the
remaining tracks will be muted (the Solo function). To solo a
different track, select one of the parameters of that track
( Sequencer P0: 0–1B).
If a track muted by the Mute or Solo function has a
"Status" (1–1a/2a) of EXT or BTH, the MIDI note-on/
off messages of that track will not be transmitted.
0–1C: Load Template Song
This command loads a preset template song (one of sixteen
types P00–15) or a user template song (one of sixteen types
U00–15) into the song ( Sequencer P0: 0–1G).
Track10
g(d)001:STANDARD Kit
C064
100
–
–
–
–
DKit
0
40
–
–
–
–
–
–
–
–
–
–
–
0–1A
0–1B
0–1C
0–1D
0–1E
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
016: Stereo Chorus
053: Reverb SmoothHall
127
050
Default settings