Specify the bus for the output of each track, and make
insert effect settings.
8-5: IFX 2
8-6: IFX 3
8-7: IFX 4
8-8: IFX 5
Make settings for the master effects and master EQ.
viii
Specify the bus and the master effect send
levels for the output of each
track ......................................................... 131
.................................................................. 131
Select insert effects, turn them on/off, and
Parameter settings for IFX1 .................. 132
Parameter settings for IFX2 .................. 132
Parameter settings for IFX3 .................. 132
Parameter settings for IFX4 .................. 132
Parameter settings for IFX5 .................. 132
Select the master effects, turn them on/
Parameter settings for MFX1 ................ 133
Parameter settings for MFX2 ................ 133
Parameter settings for master EQ ........ 133
Make basic settings that affect the entire TRITON STUDIO,
and make AUDIO INPUT settings for other than Sampling
mode. If the EXB-mLAN option is installed, make settings
for mLAN input/output.
Master tune, key transpose, effect global
switch, and auto arpeggiator on/off
settings ..................................................... 135
0-2: System Preference Bank map, system lock, and memory
Audio input settings for other than
Sampling mode ...................................... 139
Audio and MIDI output settings to an
external mLAN device (EXB-mLAN
option) ..................................................... 140
Audio and MIDI input settings from an
external mLAN device (EXB-mLAN
option) ..................................................... 141
Make MIDI settings for the entire TRITON STUDIO.
Settings such as global MIDI channel,
MIDI clock, and MIDI filter .................. 142
Make settings for the damper pedal and assignable foot
switch/pedal.
Damper pedal and assignable foot
switch/pedal settings ............................ 146
Create user octave scales and user all note scales.
Create user scales ................................... 146
Assign names to categories.
Specify program category names ......... 147
Specify combination category names .. 147
Edit or create drum kits.
Assign a drum sample to each key ...... 148
Specify the bus and pan etc. for each key
.................................................................. 150
Edit or create user arpeggio patterns.
Specify the operation of the arpeggio
pattern ..................................................... 151
6-2: Pattern Edit
Input tones for each step ....................... 153