Reverb; Reverb Effects; 052: Reverb Hall; 053: Reverb Smoothhall - Korg Triton Studio Parameter Manual

High Damp [%]
Sets the damping amount in the high range
e
Low Damp [%]
Sets the damping amount in the low range
Input Level Dmod [%]
Sets the modulation amount of the input level
f
Src
Selects the modulation source for the input level
Wet/Dry
Sets the balance between the effect and dry sounds
Src
g
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
a: BPM, b: Rhythm Pattern
With the tempo specified by the "BPM" parameter (or the MIDI
Clock tempo if "BPM" is set to MIDI), the length of one beat
equals the feedback delay time, and the interval between taps
becomes equal. Selecting a rhythm pattern will automatically turn
the tap outputs on and off. When "BPM" is set to MIDI, the lower
limit of the "BPM" is 44.
216
0...100%
Fx:043
0...100%
Fx:043

Reverb effects

–100...+100
These effects simulate the ambience of reverberation in con-
Fx:037,
cert halls.
Off...Tempo
Fx:037

052: Reverb Hall

Dry, 1:99...99:1, Wet
This hall-type reverb simulates the reverberation of mid-size
Off...Tempo
concert halls or ensemble halls.
–100...+100

053: Reverb SmoothHall

This hall-type reverb simulates the reverberation of larger
halls and stadiums, and creates a smooth release.

054: Reverb Wet Plate

This plate reverb simulates warm (dense) reverberation.

055: Reverb Dry Plate

This plate reverb simulates dry (light) reverberation.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Right
a
b
c
d
e
b: Pre Delay [msec], b: Pre Delay Thru [%]
The "Pre Delay" sets the delay time to the reverb input, allowing
you to control spaciousness.
Using the "Pre Delay Thru" parameter, you can mix the dry sound
without delay, emphasizing the attack of the sound.

Reverb

Pre Delay Thru
EQ Trim
LEQ HEQ
+
Pre Delay
EQ Trim
Reverb Time [sec]
Sets the reverberation time
High Damp [%]
Sets the damping amount in the high range
Pre Delay [msec]
Sets the delay time from the dry sound
Pre Delay Thru [%]
Sets the mix ratio of non-delay sound
EQ Trim
Sets the EQ input level
Pre LEQ Gain [dB]
Sets the gain of Low EQ
Pre HEQ Gain [dB]
Sets the gain of High EQ
Wet/Dry
Sets the balance between the effect and dry sounds
Src
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
Reverb - Hall / Plate Type
Level
Dry
Pre Delay Thru
Pre Delay
Wet / Dry
Reverb
Wet / Dry
0.1...10.0sec
0...100%
0...200msec
0...100%
0...100
–15...+15dB
–15...+15dB
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
Reverb
Time
Reverb Time