Korg Triton Studio Parameter Manual page 24

JS (+X)
Specifies in semitone units how the pitch will change when
the joystick is moved all the way to the right. A setting of 12
produces 1 octave of change.
For example if you set this to +12 and move the joystick all
the way to the right, the pitch will rise one octave above the
original pitch.
JS (–X)
Specifies in semitone units how the pitch will change when
the joystick is moved all the way to the left. A setting of 12
produces 1 octave of change.
For example if you set this to –60 and move the joystick all
the way to the left, the pitch will fall five octaves below the
original pitch. This can be used to simulate the downward
swoops that a guitarist produces using the tremolo arm.
AMS (Pitch AMS)
Selects the source that will modulate the pitch of oscillator 1
("AMS List" p.242).
Intensity (AMS Intensity)
Specifies the depth and direction of the effect produced by
"AMS (Pitch AMS)."
With a setting of 0, no modulation will be applied. With a
setting of 12.00, the pitch will change up to one octave.
For example if you set "AMS (Pitch AMS)" to After Touch
and apply pressure to the keyboard, the pitch will rise if this
parameter is set to a positive (+) value, or fall if this param-
eter is set to a negative (–) value. The range is a maximum of
one octave ( p.244).
2–1b: Pitch EG
Intensity
Specifies the depth and direction of the modulation that the
pitch EG specified in P2: Edit-Pitch, Pitch EG page will
apply to the pitch.
With a setting of 12.00, the pitch will change a maximum of
±1 octave.
AMS (Pitch EG AMS)
Selects the source that will control the pitch modulation
applied by the pitch EG ("AMS List" p.242).
Intensity (AMS Intensity)
Specifies the depth and direction of the effect that "AMS
(Pitch EG AMS)" will have.
For example if you set "AMS (Pitch EG AMS)" to Velocity
and set this value to 12.00, the velocity will control the range
of pitch change produced by the pitch EG in a range of ±1
octave ( p.244). As you play more softly, the pitch change
will draw closer to the pitch EG levels.
Pitch change (level)
Note-on Note-on
Note-off Note-off
Softly played Strongly played with
(Intensity setting) a positive (+) value
"Intensity" and "AMS (Pitch EG AMS)" will be added
to determine the depth and direction of the pitch modu-
lation applied by the pitch EG.
[–60...+12]
[–60...+12]
[Off, (FEG, AEG, EXT)]
[–12.00...+12.00]
[–12.00...+12.00]
[Off, (KT, EXT)]
[–12.00...+12.00]
Note-on
Note-off
Strongly played with a
negative (–) value
2–1c: Portamento
This turns the portamento effect (smooth change in pitch
from one note to the next) on/off, and specifies how it will be
applied.
If [SW1] key or [SW2] key are set to Porta.SW:CC#65, turning
[SW1] key or [SW2] key on/off will apply portamento ("AMS
List" p.242, "SW1, SW2 Assign List", Porta.SW:#65).
Portamento will also be switched when CC#65 (Porta-
mento SW) is received.
Enable (Porta. Enable)
On (checked): Portamento will be applied.
Off (unchecked): Portamento will not be applied.
Fingered (Porta. Fingered)
This parameter is available when "Enable (Porta. Enable)" is
checked.
On (checked): Portamento will be applied when you con-
tinue holding the previous note as you press the next note
(legato playing).
Off (unchecked): Portamento will always be applied,
regardless of how you play.
Time (Porta. Time)
This parameter is available when "Enable (Porta. Enable)" is
checked.
This sets the portamento time. Increasing the value will pro-
duce a slower change in pitch.
2–1d: LFO1/2
LFO1:
LFO1 Intensity
Specifies the depth and direction of the pitch modulation
applied by the OSC 1 LFO1 settings you made in "OSC1
LFO1" (5–1).
With a setting of 12.00, a maximum of ±1 octave of pitch
modulation will be applied. Negative (–) values will invert
the LFO waveform.
JS+Y Int. (LFO1 JS+Y Int.)
Specifies the depth and direction of the effect that joystick
movement in the +Y direction (away from yourself) will
have on the pitch modulation applied by the OSC1 LFO1.
As this value is increased, moving the joystick in the +Y
direction will cause the OSC1 LFO1 to produce deeper pitch
modulation. With a setting of 12.00 a maximum of ±1 octave
of pitch modulation will be applied. Negative (–) values
will invert the LFO waveform.
AMS (LFO1 AMS) [Off, (PEG, FEG, AEG, KT, EXT)]
Selects the source that will control the depth of pitch modu-
lation produced by the OSC1 LFO1 ("AMS List" p.242).
Intensity (AMS Intensity)
Specifies the depth and direction of the effect that "AMS
(LFO1 AMS)" will have.
With a setting of 0, modulation will not be applied. With a
setting of 12.00, the OSC1 LFO1 will apply a maximum of ±1
octave of pitch modulation. Negative (–) settings will invert
the LFO waveform.
For example if "AMS (LFO1 AMS)" is set to After Touch and
you apply pressure to the keyboard, a positive (+) setting of
this parameter will cause the pitch modulation created by OSC1
LFO1 to be applied with the normal phase, and a negative (–)
setting will cause the LFO to be applied with inverted phase.
[Off, On]
[Off, On]
[000...127]
[–12.00...+12.00]
[–12.00...+12.00]
[–12.00...+12.00]
13