Korg Triton Studio Parameter Manual page 292

Music workstation/sampler
Hide thumbs Also See for Triton Studio:
Table of Contents

Advertisement

[3] Parameters that are valid on the
TRITON STUDIO and TRITON but
invalid on the TRITON-Rack
3-1. Global mode parameters of the TRITON STU-
DIO and TRITON
Beep
Foot Switch Assign
Foot Pedal Assign
Damper Polarity
Foot Switch Polarity
• TRITON STUDIO or TRITON
(.PCG file load/MIDI data dump)
These parameter settings are saved by the TRITON-Rack
as internal data, but are ignored. When the TRITON-
Rack saves this state as a .PCG file or performs a MIDI
data dump, the settings will be output in the condition in
which they were loaded or received via MIDI data dump.
• TRITON-Rack
TRITON STUDIO or TRITON
(.PCG file load/MIDI data dump):
These parameters will be set to their default values.
Convert Position
• TRITON STUDIO or TRITON
(.PCG file load/MIDI data dump):
The PreMIDI or PostMIDI setting of this parameter is
saved by the TRITON-Rack as internal data, but is
ignored, and the TRITON-Rack will operate as if the set-
ting were PostMIDI. When the TRITON-Rack saves this
state as a .PCG file or performs a MIDI data dump, the
setting will be output in the condition in which it was
loaded or received via MIDI data dump.
• TRITON-Rack
TRITON STUDIO or TRITON
(.PCG file load/MIDI data dump):
This parameter will be set to "PostMIDI."
MIDI Clock
• TRITON STUDIO or TRITON
(.PCG file load/MIDI data dump):
The External PCI/F setting of this parameter is saved by
the TRITON-Rack as internal data, but is ignored, and
the TRITON-Rack will operate as if the setting were
External. When the TRITON-Rack saves this state as a
.PCG file or performs a MIDI data dump, the setting will
be output in the condition in which it was loaded or
received via MIDI data dump.
3-2. TRITON Combination and Sequencer mode
MIDI Filter "Enable Foot Pedal/Switch" param-
eter
• TRITON STUDIO or TRITON
(.PCG/.SNG file load/MIDI data dump):
The parameter setting is saved by the TRITON-Rack as
internal data, but is ignored. When the TRITON-Rack
saves this state as a .PCG/.SNG file or performs a MIDI
data dump, the setting will be output in the condition in
which it was loaded or received via MIDI data dump.
• TRITON-Rack
TRITON STUDIO or TRITON
(.PCG/.SNG file load/MIDI data dump):
This parameter will be set to "On."
3-3. TRITON STUDIO or TRITON Sequencer mode
TRITON-Rack
• TRITON STUDIO or TRITON
• TRITON-Rack
TRITON-Rack
• TRITON STUDIO or TRITON
• TRITON STUDIO or TRITON
TRITON-Rack
• TRITON STUDIO or TRITON
• TRITON STUDIO or TRITON
TRITON-Rack
parameters and data
Sequencer mode data of the TRITON STUDIO and TRI-
TON is compatible with the Multi mode data of the TRI-
TON-Rack via .PCG file load or MIDI data dump.
However, you must use caution regarding the following
parameters and data.
Meter
Tempo Mode
Track1-16 PLAY/MUTE
Track Play Loop
Track Play Loop Start Measure
Track Play Loop End Measure
Play Intro
(.SNG file load/MIDI data dump):
These parameter settings are maintained by the TRITON-
Rack as internal data, but are ignored. When the TRI-
TON-Rack saves this state as a .PCG/.SNG file or per-
forms a MIDI data dump, the settings will be output in
the condition in which they were loaded or received via
MIDI data dump.
TRITON STUDIO or TRITON
(.SNG file load/MIDI data dump):
These parameters will be set to their default values.
Cue List data (Cue list setting data)
(.SNG file load):
This data will not be loaded.
(MIDI data dump):
On the TRITON-Rack, this is saved as internal data of
Multi mode, but is ignored. When the TRITON-Rack per-
forms a MIDI data dump in this state, the settings will be
output in the condition in which they were received via
MIDI data dump.
Track data (Events of all song tracks)
(.SNG file load):
This data will be loaded if you check Load track events?
( "Load selected 15, 16"). On the TRITON-Rack, this
will be saved as internal data of Multi mode, but is not
used in Multi mode. This data will be output when the
TRITON-Rack saves a .SNG file.
(MIDI data dump):
On the TRITON-Rack, this will be saved as internal data
of Multi mode, but is not used in Multi mode. This data
will be output when the TRITON-Rack transmits a MIDI
data dump.
TRITON-Rack
TRITON-Rack
TRITON-Rack:
TRITON-Rack
TRITON-Rack
281

Advertisement

Table of Contents
loading

Table of Contents