Hard Drive Status Indicator - Inspur NF8480M5 Operation And Maintenance Manual

Table 4-1 NF8480M5 front panel indicator functions
Numbering Module name
Power switch
5
6
7 Sys RST key
System fault
8
According to the above chart, the fault components and causes can be diagnosed and
located according to the status of the fault lights on the front panel of the machine.
The hard disk status indicator lamp is shown in Figure 5-5, and the specific function
description is shown in Table 5-2.
Table 4-2 Function Description of Hard Disk Status Indicator
Numbering
1
2
The power indicator is on the power module at the rear of the chassis, as shown in Figure
5-6.
Copyright Inspur Electronic Information Industry Co., Ltd.
In the power-on state, the indicator is green.
In standby mode, indicator is orange
button
Press 4s long to force shutdown.
UID Enable/disable UID, it`s blue or off.
Press 6s long to force the system to restart.
Normal not bright
When a fault occurs, it is always bright red.
indicator
Red flashes when a warning occurs
Figure 4-5
Name
Solid red: hard disk failure
Hard disk failure
Solid Blue: Hard Disk Positioning
alarm indicator
Solid blue: RAID Rebuilding
Solid red: hard disk failure
Hard Drive Activity
Solid Blue: Hard Disk Positioning
Indicator
Solid blue: RAID Rebuilding
Inspur proprietary and confidential information
Functional description

4.3.2 Hard drive status indicator

Function and description
4.3.3 Power Status Indicator
NF8480M5
Operation and
Maintenance Guide
9