Agilent Technologies 5975T LTM GC Operation Manual page 86

3
Operating in Electron Impact (EI) Mode
6 In the Column Type area select Composite and set the manufacturer's
7 In the Composite Column Segments area, Segment column, Main Segment item
8 In the Composite Column Segments area, Segment column, In Segment item
9 In the Composite Column Segments area, Segment column, Out Segment item
10 Click the OK button to complete the column configuration for the
11 From the Configuration screen, select the Modules tab to display the screen
12 For the Front Inlet, select the carrier gas used from the dropdown menu.
13 Click the OK button to save this configuration.
86
recommended maximum temperature in the Max Temperature field.
select LTM from the Heated By column dropdown.
select Thermal Aux 1 from the Heated By column dropdown. Enter the Length,
Diameter, and Film Thickness for the inlet guard column.
select Thermal Aux 1 from the Heated By column dropdown. Enter the Length,
Diameter, and Film Thickness for the MSD guard column.
instrument.
where the carried gas for the inlet is displayed.
5975T LTM GC/MSD Operation Manual