Agilent Technologies 5975T LTM GC Operation Manual page 67

Table 9
Action
Control firmware
Operating system
Front panel
Log amplifier
Sideboard
Mainboard
Serial number
Table 10
Action
Reboot controller
Test LCP?
Test HTTP link to GC/MSD
ChemStation?
To access a particular menu item in the parameters listed in Tables 11 and 12,
press [Menu] until the desired menu appears, then press [Item] once. The LCP
automatically scrolls through the parameters one at a time. Press [Item] again
to stop at the desired parameter.
Table 11
Action
GC Inlet Heater
GC-MSD Interface
GC Conn. Zone Heater
GC Column Heater
5975T LTM GC/MSD Operation Manual
Version menu
Description
Displays the MSD firmware version.
Displays the GC/MSD ChemStation operating system version.
Displays the version of the LCP.
Displays version information.
Displays the sideboard type.
Displays the mainboard type.
Is assigned to the MSD by GC/MSD ChemStation Configuration
dialogue.
Controller menu
Description
Starts the LAN/MS control card.
Initiates a diagnostic test of the two-line display.
Checks the status of the HTTP server.
GC Device Status menu
Description
Displays the status of the GC inlet heater (Ready/Not Ready)
Displays the status of the GC-MSD interface temperature.
Displays the status of the guard column enclosure heater.
Displays the status of the LTM heater.
Operating in Electron Impact (EI) Mode
3
67