Table of Contents
Advertisement
Cleaning/Recycling the Product
To clean the unit, disconnect the power and wipe down with a damp, lint-free
cloth. For recycling, contact your local Agilent sales office.
Liquid Spillage
Do not spill liquids on the instrument.
Moving or Storing the GC/MSD
The best way to keep your GC/MSD functioning properly is to keep it pumped
down and hot, with carrier gas flow. If you plan to move or store your
GC/MSD, a few additional precautions are required. The GC/MSD must remain
upright at all times; this requires special caution when moving. The GC/MSD
should not be left vented to atmosphere for long periods. Consult the
Hardware Installation Manual for Field Transportable Units for information
on how to secure, pack, transport and routinely set up the unit.
5975T LTM GC/MSD Operation Manual
1
Introduction
27
Advertisement
Table of Contents
