Agilent Technologies 5975T LTM GC Operation Manual page 46

2
Installing LTM Columns
10 From the ChemStation, edit the column configuration for the LTM module
Now you are ready to condition the LTM column module, if necessary. See
Condition the LTM Column Module"
To attach the guard columns from the MSD and inlet to the module's CFT
union connections see
Inlet"
on page 38, and
page 52.
46
and change the carrier gas type configured if switching to a different
carrier gas supply.
on page 33, "To Install an MSD Guard Column in the GC/MSD Interface"
"To Attach the Guard Columns to the LTM CFT Unions"
on page 56.
"To Install an Inlet Guard Column in the Split/Splitless
5975T LTM GC/MSD Operation Manual
"To
on