Safety And Regulatory Certifications - Agilent Technologies 5975T LTM GC Operation Manual

1
Introduction

Safety and Regulatory Certifications

The 5975T LTM GC/MSD conforms to the following safety standards:
• Canadian Standards Association (CSA): CAN/CSA-C222 No. 61010-1
• International Electrotechnical Commission (IEC): 61010–1
• EuroNorm (EN): 61010–1
The 5975T LTM GC/MSD conforms to the following regulations on
Electromagnetic Compatibility (EMC) and Radio Frequency Interference
(RFI):
• CISPR 11/EN 55011: Group 1, Class A
• IEC/EN 61326
• AUS/NZ
This ISM device complies with Canadian ICES-001. Cet appareil ISM est
conforme a la norme NMB—001 du Canada.
The 5975T LTM GC/MSD is designed and manufactured under a quality system
registered to ISO 9001.
Information
The Agilent Technologies 5975T LTM GC/MSD meets the following IEC
(International Electro-technical Commission) classifications: Equipment Class
I, Laboratory Equipment, Installation Category II, Pollution Degree 2.
This unit has been designed and tested in accordance with recognized safety
standards and is designed for use in stationary or mobile labs. If the
instrument is used in a manner not specified by the manufacturer, the
protection provided by the instrument may be impaired. Whenever the safety
protection of the MSD has been compromised, disconnect the unit from all
power sources and secure the unit against unintended operation.
Refer servicing to qualified service personnel. Substituting parts or
performing any unauthorized modification to the instrument may result in a
safety hazard.
24 5975T LTM GC/MSD Operation Manual