Agilent Technologies 5975T LTM GC Operation Manual page 66

3
Operating in Electron Impact (EI) Mode
Table 6
Action
Prepare to vent
Pumpdown
Table 7
Action
Turbo Pump Speed
MSD Fault Status
Ion Source Temp,
Quadrupole Temp,
MS parameters cannot be set from the LCP while an online GC/MSD ChemStation session
N O T E
is connected to the MSD.
Table 8
Action
MSD IP via keyboard
Gateway IP Address
Subnet Mask
ChemStation IP
GC IP Address
Ping gateway
Ping ChemStation
Ping GC
MS Controller MAC
66
Maintenance menu
Description
Reminds you to shut down the GC then prepares the instrument for
venting when [Yes/Select] is pressed.
Initiates a pumpdown sequence.
MS Parameters menu
Description
Displays the turbo pump speed.
Reports a summary fault status code (number) in 'dec' (decimal) and
'hex' (hexadecimal) format covering all possible fault combinations.
o
C Displays and sets the ion source temperature.
o
C Displays and sets the quadrupole temperature.
Network menu
Description
Displays the IP address for the MSD.
Displays the gateway IP address for the MSD.
Displays the subnet mask for the MSD.
Displays the IP address for the GC/MSD ChemStation.
Displays the IP address for the GC.
Checks communication with the gateway.
Checks communication with the GC/MSD ChemStation.
Checks communication with the GC.
Displays the MAC address of the SmartCard in the MSD.
5975T LTM GC/MSD Operation Manual