Agilent Technologies 5975T LTM GC Operation Manual page 35

Figure 5
4 Break off the end of the column. Hold the column against the column cutter
5 Inspect the end for jagged edges or burrs. If the break is not clean and even,
6 Wipe the outside of the free end of the column with a lint-free cloth
5975T LTM GC/MSD Operation Manual
Column cutter edge
with your thumb. Break the column against the edge of the column cutter.
repeat steps 3 and 4.
moistened with methanol.
Installing LTM Columns
2
35