Operating In Electron Impact (Ei) Mode - Agilent Technologies 5975T LTM GC Operation Manual

Agilent 5975T LTM GC/MSD
Operation Manual
3

Operating in Electron Impact (EI) Mode

Operating the GC/MSD from the Data System
Operating the GC/MSD from the LCP
LCP Status Messages
LCP Menus 65
The GC/MSD Interface
Before You Turn On the GC/MSD
Pumping Down 73
Controlling Temperatures
Controlling Column Flow
Venting the MSD 75
To View MSD Analyzer Temperature and Vacuum Status
To Set Monitors for MSD Temperature and Vacuum Status
To Set the MSD Analyzer Temperatures
To Set the GC/MSD Interface Temperature from the ChemStation
To Monitor High Vacuum Pressure
To Configure the LTM Column
To Measure Column Flow Linear Velocity
To Confirm Column Flow
To Tune the MSD 89
To Verify System Performance
High-Mass Testing (5975T LTM GC/MSDs)
To Open the LTM/Guard Column Enclosure Door
To Open the LCP/Analyzer Window
To Remove the Analyzer Top Cover
To Vent the MSD 97
To Open the Analyzer Chamber
To Close the Analyzer Chamber
To Pump Down the MSD
To Move or Store the Instrument
Agilent Technologies
61
63
69
71
73
73
79
83
85
87
88
90
91
95
95
99
102
106
108
61
76
78
81
94
59