Agilent Technologies 5975T LTM GC Operation Manual page 109

Front thumbscrew
Rear thumbscrew
Figure 30 Side plate thumbscrews
The GC/MSD can now be stored or moved. The foreline pump cannot be
disconnected; it must be moved with the MSD. Make sure the GC/MSD remains
upright and is never tipped on its side or inverted.
The GC/MSD must remain upright at all times. If you need to ship your GC/MSD to
C A U T I O N
another location, contact your Agilent Technologies service representative for advice
about packing and shipping.
5975T LTM GC/MSD Operation Manual
Operating in Electron Impact (EI) Mode
3
109