Diagnostics - Siemens SITOP UPS1600 Equipment Manual

Engineering and remote access
3.4 SIMATIC STEP 7 in the TIA Portal
The project data are compiled. The "Load" button is activated as soon as loading is
possible.
3. Click on "Load".
Data is loaded. The "Result of the load operation" dialog window is then opened. In this
dialog, you can check whether the load task was successful and select any further actions.
4. Click on the "Finish" button.
Result
The set parameters have been loaded to the SITOP UPS1600 via the controller.
3.4.9

Diagnostics

The following data can be retrieved using the online and diagnostics function:
Navigation area
General
PROFINET interface
Functions
82
Module
Module information
Manufacturer information
Ethernet address / network connection
Ethernet address / IP parameter
Ports
Assign an IP address
Firmware update / UPS1600
Value
Short designation
Article number
Hardware
Firmware
Device name
Module name
Plant designation
Location ID
Description of manufacturer
Serial number
Copyright entry
Profile
Profile details
MAC address
IP address
Subnet mask
Default router
IP settings
IP setting time
List of ports
MAC address
IP address
Subnet mask
Router address
Article number
Firmware
Name
Rack
Slot
Firmware file
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76