Contact rating:
30 V AC/0.5 A 60 V DC/0.3 A 30 V DC/1 A
Note
From the instant in time when the SITOP UPS1600 is switched over into the buffer mode, for
the evaluation, instead of the expected buffer current, the actually measured buffer current is
used. As a consequence, the status of the LEDs and the relay can also change.
Note
The value assumed for the buffer time is based on the battery being in a new state.
2.4.2
SITOP BAT1600
No.
④
Meaning of the LED colors for buffering:
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
Labeling
Signal type
O.K.
LED
Green
≙ buffer readiness
Yellow
≙ buffer mode endangered
Red
≙ buffer mode not possible
Description, device design, dimension drawing
2.4 Operating displays and signaling
Signaling
Device status
45