Siemens SITOP UPS1600 Equipment Manual page 36

Description, device design, dimension drawing
2.3 Operator controls
Changes are also effective in the buffer mode.
Table 2- 1
Rotary coding
buffer time
OFF, 0.5 - MAX
OFF, 0.5 - MAX
Table 2- 2
Rotary coding
buffer time
OFF, 0.5 - MAX
OFF, 0.5 - MAX
Table 2- 3
Rotary coding
buffer time
36
With interface (up to firmware release less than V1.20)
Rotary coding
switch switch
connection
threshold
OFF 21 - 25
0.5 - MAX 21 - 25
21 - 25
REN
With interface (from firmware release V1.20 up to V2.0.x)
Rotary coding
switch switch
connection
threshold
OFF 21 - 25
0.5 - MAX 21 - 25
21 - 25, REN
REN
With interface (from firmware release V2.1)
Rotary coding
switch switch
connection
threshold
OFF 21 - 25
0.5 - MAX 21 - 25
0.5 - MAX 21 - 25
OFF, 21 - 25, REN
0.5 - MAX
Wire jumper ON/OFF (pin 9)
to (pin 10)
Yes
Yes
No
Not relevant
Wire jumper ON/OFF (pin 9)
to (pin 10)
Yes
Yes
No
Yes
Wire jumper ON/OFF (pin 9)
to (pin 10)
Yes
No
Yes
No
Equipment Manual, 07.2021, A5E37775406-11-76
Result
Buffering not permitted
Buffer mode permitted
(buffer time corresponding
to the settings or maxi-
mum buffer time)
Buffering not permitted
The software settings
apply
Result
Buffering not permitted
Buffer mode permitted
(buffer time corresponding
to the settings or maxi-
mum buffer time)
Buffering not permitted
The software settings
apply
Result
Buffering not permitted
Buffering not permitted
Buffer mode permitted
(buffer time corresponding
to the settings or maxi-
mum buffer time)
Buffering not permitted
SITOP UPS1600 / BAT1600 / UPS1100