Parameterset; Pn (Profinet); Subdevices - Siemens SITOP UPS1600 Equipment Manual

Display name Data type
OPCUAServerPort Integer
Setpoint
OPCUAUnencrypted Boolean
AccessEnable
Setpoint
3.10.6.20

ParameterSet

/
All variables of the SITOP UPS1600 are listed together under the "ParameterSet" node.
3.10.6.21

PN (PROFINET)

Display name Data type
PNARSetupLocked Boolean
Setpoint
PNDCPReadonly Boolean
EnableSetpoint
3.10.6.22

SubDevices

In folder "SupportedTypes", variables and methods are listed, which are available for the
buffer modules.
SITOP BAT1600 and SITOP UPS1100
ActualBufferState
Display name Data type
BufferTime UInt32
BufferingEndVoltage Float
ActualChargingState
Display name Data type
ChargeCurrent Float
ChargeEndVoltage Float
ChargingTotalCurrent Float
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
Definition Description
PropertyType OPC UA server port
PropertyType Unencrypted access activated
Definition Description
PropertyType AR configuration locked
PropertyType ODCP write protection activated
Definition Description
AnalogItemType Desired buffering time before device switches off
AnalogItemType When battery voltage is lower than this voltage, the battery
charge is no longer sufficient. Buffering is stopped.
Definition Description
AnalogItemType Current used to charge battery during the constant charging
phase.
AnalogItemType Battery voltage when charging changes to trickle charging.
Battery is charged 100 %.
AnalogItemType Battery-specific data: Total charge to the battery during its
service life
Engineering and remote access
3.10 OPC UA server
175