Siemens SITOP UPS1600 Equipment Manual page 169

Display name Data type
AlarmBatteryDischarge Boolean
BecauseChargingDeac-
tivated
AlarmBatterySOHtest Boolean
CanceledBuffering
AlarmBatterySOHtest Boolean
CanceledByConfigura-
tion
AlarmBatterySOHtest Boolean
CanceledByUser
AlarmBatterySOHtest Boolean
CanceledInputVolt-
ageHigh
AlarmBatterySOHtest Boolean
CanceledInsufficient-
Load
AlarmBatterySOHtest Boolean
CanceledNotFull
AlarmBatterySOHtest Boolean
Running
AlarmBatterySOHtest Boolean
Running
AlarmBufferMode Boolean
NotPossible
AlarmBuffer Boolean
TimerReset
AlarmBuffering Boolean
AlarmChargeCurrent Boolean
ManualChanged
AlarmCommunication Boolean
ToDeviceFailed
AlarmDevice Boolean
Failure
AlarmDevice Boolean
Overtemperature
AlarmDevice Boolean
ParameterCorrupt
AlarmDevice Boolean
PoweredUp
AlarmDevice Boolean
TemperatureHigh
AlarmDevice Boolean
TemperatureLow
AlarmDevice Boolean
TurnedOff
AlarmFirmware Boolean
UpdateOK
AlarmFuseBroken Boolean
AlarmInput Boolean
VoltageHigh
AlarmInsufficient- Boolean
Charge
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
Definition Description
PropertyType Low charge status of the battery as a result of deactivated
charging function.
PropertyType Capacity test canceled. Buffering was started.
PropertyType Capacity test canceled due to changed or invalid configura-
tion
PropertyType User canceled the capacity test.
PropertyType Capacity test canceled. Input voltage is too high
PropertyType The capacity test was canceled due to an insufficient system
load.
PropertyType Capacity test canceled. Batteries are not fully charged.
PropertyType Capacity test being performed.
PropertyType Battery 'State of Health' tests (SoH) are in progress.
PropertyType Buffer mode not possible - check settings, cabling, fuse, and
battery voltages
PropertyType PC is shutting down
PropertyType Device is in buffer mode.
PropertyType Max. permissible charging current was limited as a result of
the configuration parameters
PropertyType PROFINET connection available - SITOP UPS1600 is defective
PropertyType Device failure
PropertyType Output and battery charging is switched off to prevent dam-
age to the device.
PropertyType SITOP UPS1600 parameters corrupt - try to update the soft-
ware.
PropertyType Device powered up
PropertyType Device temperature higher than 100° C. Caution: The high-
est permitted temperature could be exceeded!
PropertyType Device temperature lower than -10° C. Device could leave
the operating range.
PropertyType SITOP UPS1600 off - buffer time exceeded or PC was shut
down
PropertyType Previous software update was successful - SITOP UPS1600 is
operational again.
PropertyType Fuse is defective.
PropertyType Input voltage exceeds 30 V. SITOP UPS1600 is not opera-
tional.
PropertyType The configured buffer time may not be reached at this time
due to the low battery charge.
Engineering and remote access
3.10 OPC UA server
169