Sitop Ups1100 - Siemens SITOP UPS1600 Equipment Manual

Description, device design, dimension drawing
2.4 Operating displays and signaling
States of the LEDs
Signaling
2.4.3

SITOP UPS1100

Figure 2-22
States of the LEDs
Signaling
46
6EP4132-0JA00-0AY0 (2.5 Ah)
6EP4133-0GA00-0AY0 (3.2 Ah)
6EP4134-0JA00-0AY0 (7.5 Ah)
Off Module runs up, DC-UPS defective (critical hardware fault)
Flashing green Battery is being replaced (button pressed, reset service life)
(0.25/0.25)
Flashing green Battery successfully replaced (LED flashes for 5 s)
(1/1)
Flashing green Battery replacement recommended (SoH ≤ 20 %)
(1/1)
Green Battery module OK
Flashing yellow End of the battery service life reached (SoH = 0 %) or battery test
(0.25/0.25) negative → battery must be replaced, buffer mode possible
Flashing yellow Temperature outside the valid range, communication cable interrupted or
(1/1) different battery types being used → restricted charge operation
Yellow Selected buffer time cannot be attained
Flashing red (1/1) Battery replacement canceled (LED flashes for 5 s)
Red Fuse ruptured/not inserted, power cable interrupted, 1 battery in the mod-
ule is not connected, battery pack voltage is not symmetrical or reset button
is pressed > 2 s
Example 6EP4131-0GB00-0AY0
6EP4131-0GB00-0AY0 (1.2 Ah)
6EP4132-0GB00-0AY0 (2.5 Ah)
6EP4133-0GB00-0AY0 (3.2 Ah)
Off Module runs up, DC-UPS defective (critical hardware fault)
Green Battery module OK
Flashing yellow Battery outside the permitted temperature range
(1/1)
Yellow Selected buffer time cannot be attained
Red Battery module fault, maintenance required (incorrect polarity, battery
module not connected, high ohmic battery module connection, battery
deep discharged, fuse defective/ruptured, asymmetrical cell voltage, battery
R test unsuccessful)
6EP4135-0GE00-0AY0 (12 Ah)
6EP4137-0GE00-0AX0 (38 Ah)
6EP4133-0JB00-0AY0 (5 Ah)
6EP4134-0GB00-0AY0 (7 Ah)
6EP4135-0GB00-0AY0 (12 Ah)
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76