Maintenance; Battery Types - Siemens SITOP UPS1600 Equipment Manual

Installation

7.8 Maintenance

7.8 Maintenance
7.8.1

Battery types

SITOP BAT1600 devices contain 1, 2 or 3 x maintenance-free batteries.
Device type
6EP4132-0JA00-0AY0 (2.5 Ah)
6EP4133-0GA00-0AY0 (3.2 Ah)
6EP4134-0JA00-0AY0 (7.5 Ah)
6EP4135-0GE00-0AY0 (12 Ah)
6EP4137-0GE00-0AX0 (38 Ah)
SITOP UPS1100 devices include 2 x maintenance-free batteries
Device type
6EP4131-0GB00-0AY0 (1.2 Ah)
6EP4132-0GB00-0AY0 (2.5 Ah)
6EP4133-0GB00-0AY0 (3.2 Ah)
6EP4133-0JB00-0AY0 (5 Ah)
6EP4134-0GB00-0AY0 (7 Ah)
6EP4135-0GB00-0AY0 (12 Ah)
When replacing the batteries, always use batteries with the same batch number
(approximately the same charge state).
The rechargeable batteries must be disposed of, discharged according to the applicable
regulations.
When storing, installing and operating the buffer batteries, the regulations of VDE 0510
Part 2 / EN 50272-2 or the applicable national regulations must be observed.
The self-discharge rate of the batteries is approx. 3%/month for a temperature of 20° C. This
value is temperature dependent and becomes more unfavorable for an increasing
temperature, and more favorable for a decreasing temperature.
224
Quantity Battery type
1 unit LiFePO4 Type: Grepow GRP5970096-25C-25.6V
2800 mAh
2 units Pb type: YUASA NP3,2-12 or Powerkingdom
PS3.2-12
3 units LiFePO4 Type: Grepow GRP5970096-25C-25.6V
2800 mAh
2 units Pb type: YUASA NP12-12 or Powerkingdom PS12-
12
2 units Pb type: YUASA NPL38-12I (FR) or Panasonic
P1238APG
Battery type
2 × YUASA NP1,2-12
Hawker Energy CYCLON 0810-0075 2.5-12
YUASA NP3,2-12 or
B.B.Battery BP3,6-12 or
Fiamm FG20341 or
Powerkingdom PS3.2-12
NEC ALM12V7s
YUASA NP7-12 or
B.B.Battery BP7-12 or
Fiamm FG20721 or
Powerkingdom PS7-12
YUASA NP12-12 or
B.B.Battery BP12-12 or
Fiamm FG21202 or
Powerkingdom PS12-12
Equipment Manual, 07.2021, A5E37775406-11-76
SITOP UPS1600 / BAT1600 / UPS1100