Communication interface
You have the option of configuring the communication interface regarding the following
points:
• Device name Defining the device name
• DHCP: Defining whether the IP address is dynamically assigned (activate DHCP) or whether
it should be fixed.
• Fixed IP address with IP address, Subnet mask and Router address
Procedure
1. Select the "Hardware configuration" menu.
2. Select submenu "General".
3. Select the "Communication interface" entry.
4. In the editor area, under "Device name" enter the required device name.
5. To dynamically assign the IP address: Activate checkbox "Source IP address via DHCP".
6. To assign a fixed IP address: Activate checkbox "Fixed IP address" and enter the appropriate
parameters in the editor area.
7. Load the data to the device, see Load / Save (Page 155).
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
Engineering and remote access
3.9 Web server
143