Reading And Writing Data Sets - Siemens SITOP UPS1600 Equipment Manual

Slot
3.6.2

Reading and writing data sets

An overview of all data sets, which are communicated between the SITOP UPS1600 and the
PROFINET IO-Controller is provided in the following table. Here, a distinction is made
between the following data sets:
• Reading data sets: Data that is sent from the SITOP UPS1600 to the
PROFINET IO-Controller.
• Writing data sets: Data that is sent from the PROFINET IO-Controller to the SITOP
UPS1600.
Index Slot Sub-
slot
0x0001 0 1
0x0002 0 1
0x0003 0 1
0x0004 0 1
0x0005 0 1
0x0006 0 1
0x0007 0 1
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
Subslot Data
Battery change
recommended
Not used
Battery charge level
Battery connection
maintenance
from V2.1
Data set Type
Buffering parameters Reading/
writing
Battery parameters Reading/
writing
Charging parameters Reading/
writing
Reset parameters Reading/
writing
Battery information Reading
parameters
Device information Reading
Parameters
Hardware settings Reading
parameters
Engineering and remote access
Description
Battery replacement recommend-
ed: Battery capacity is insufficient
to achieve the specified buffer
time:
• 0: no
• 255: yes
-
Battery charge level in %:
• 0-100: 0-100%
• 255: unknown battery
Connection to the battery inter-
rupted: Check the connection and
fuse:
• 0: no maintenance required
• 255: maintenance required
Description
Buffer parameters.
Parameters of the connected battery
modules
Charge parameters of the connected
battery modules
Reset parameters.
Information about the connected SITOP
BAT1600 or SITOP UPS1100 battery
modules. This information is available
via the link "Energy Storage".
Information about the
SITOP UPS1600.
Hardware settings of the
SITOP UPS1600 (settings that were
made at the front of the device).
3.6 Cyclic and acyclic data
Data size
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Data size
14 bytes
16 bytes
(from V2.4)
5 bytes
4 bytes
1 byte
1024 bytes
556 bytes
(from V2.4)
124 bytes
8 bytes
107