Light Source - MICRO-EPSILON surfaceCONTROL SC2500 Operating Instructions Manual

Light Source

2. Light Source
The surfaceCONTROL 3D 25x0 sensor works with an LED lighting unit. Measurement is performed using blue light at the
dominant 462 nm wavelength. The sensor is included in risk group 2 according to EN 62471: 2008.
Do not look into the lens. Consciously close your eyes or immediately turn away if the optical radia-
tion enters the eye.
The warning sign below is attached to the front side:
Fig. 1 LED warning sign
i
If the information sign is covered over when the unit is installed, the user must ensure that a supplementary infor-
mation sign is attached at the installation location.
surfaceCONTROL 3D SC2500 / SC2510 Page 7