MICRO-EPSILON surfaceCONTROL SC2500 Operating Instructions Manual page 39

Appendix | GenICam surfaceCONTROL Parameters | Version 1.5
Name
Event Control
EventFrameTriggerData
EventFrameTrigger
EventFrameTriggerMissedData
EventFrameTriggerMissed
EventExposureEndData
EventExposureEnd
EventFrameStartData
EventFrameStart
EventFrameEndData
EventFrameEnd
EventWarningData
EventWarning
EventWarningCode
EventWarningMessage
EventErrorData
EventError
surfaceCONTROL 3D SC2500 / SC2510
Description
Category that contains all
the data features related to
the FrameTrigger Event.
Returns the unique Iden-
tifier of the FrameTrigger
type of Event.
Category that contains all
the data features related
to the FrameTriggerMissed
Event.
Returns the unique Identi-
fier of the FrameTriggerMi-
ssed type of Event.
Category that contains all
the data features related to
the ExposureEnd Event.
Returns the unique iden-
tifier of the ExposureEnd
type of Event.
Category that contains all
the data features related to
the FrameStart Event.
Returns the unique identifi-
er of the FrameStart type
of Event.
Category that contains all
the data features related to
the FrameEnd Event.
Returns the unique identifi-
er of the FrameEnd type
of Event.
Category that contains all
the data features related to
the Warning Event.
Returns the unique identifi-
er of the Warning type of
Event.
Returns an warning code
for the warning(s) that
happened.
Returns a detailed mes-
sage for the warning.
Category that contains all
the data features related to
the Error Event.
Returns the unique iden-
tifier of the Error type of
Event.
Documentation Text
This event is triggered when a trigger has been initiated.
This event is triggered when a trigger has been initiated.
This event is triggered when a measurement is triggered although the
most recent measurement has not yet been completed.
This event is triggered when a measurement is triggered although the
most recent measurement has not yet been completed.
This event is triggered when image acquisition for a measurement
has been completed and calculation of the 3D results is started. The
sensor or measuring object can now be moved to the next measuring
position.
This event is triggered when image acquisition for a measurement
has been completed and calculation of the 3D results is started. The
sensor or measuring object can now be moved to the next measuring
position.
This event is triggered when the measurement is started.
This event is triggered when the measurement is started.
This event is triggered when the measurement is completed.
This event is triggered when the measurement is completed.
This event is triggered when a warning occurs during the measure-
ment.
This event is triggered when a warning occurs during the measure-
ment.
This parameter returns the warning type for a warning. The following
warning codes are possible:
- 1: Warning: Device temperature is becoming critical.
In addition to the warning, an additional description of the warning is
returned if necessary.
This event is triggered when an error occurs during the measurement.
This event is triggered when an error occurs during the measurement.
Page 39