Polycom RealPresence 1800 Getting Started Manual page 47

P R P C
OLYCOM EAL RESENCE OLLABORATION
P R P C
OLYCOM EAL RESENCE OLLABORATION
S .8.6
ERVER V
• Connect the E1/T1 cables to PRI.
• Connect the LAN cable to LAN 1ports.
A I
DDITIONAL NFORMATION
both management, media and signaling network connection. Connect the
media and signaling cable to LAN 2 port. By default this port is used for
signaling, but when LAN redundancy is enabled, LAN 2 is the backup of LAN 1
port.
Connect Cables to the Four-Port RTM ISDN Card of RealPresence Collabo-
ration Server (RMX) 4000
T
ASK
1. To connect cables to the four-port RTM ISDN card of RealPresence
Collaboration Server (RMX) 4000:
2. Connect the E1/T1 cables to PRI.
3. In MPMRx card mode, connect the LAN cable toLAN1 and LAN 2.
Figure 1-18: RealPresence Collaboration Server (RMX) 4000 rear panel with AC
powers and communication cables
S G S
ERVER ETTING TARTED
I R P
NSTALLING THE EAL RESENCE
: When LAN redundancy is enabled, LAN 1 is used for
G
UIDE
A E I
PPLIANCE DITION NSTALLATION
C S (RMX) 4000
OLLABORATION ERVER
45