Polycom RealPresence 1800 Getting Started Manual page 46

A E I
PPLIANCE DITION NSTALLATION
I R P
NSTALLING THE EAL RESENCE
Connect Cables to the RTM LAN Card of RealPresence Collaboration Server (RMX)
4000
Connect Cables to the RTM ISDN Card of RealPresence Collaboration Server (RMX)
4000
44
C S (RMX) 4000
OLLABORATION ERVER
T
ASK
• To connect the cables to the RTM LAN Card of RealPresence Collabora-
tion Server (RMX) 4000:
• When an RTM LAN-4 port card is installed on the RealPresence Collab-
oration Server (RMX) 4000, connect the LAN cable to LAN 2.
A I
DDITIONAL NFORMATION
configurations, connect the LAN cable to LAN 1.
• An MPMRx card on the front of the RMX must always be seated or
connected opposite to either an RTM LAN - 4 ports or RTM ISDN card on
the rear of the chassis.
• The RTM LAN type card is always required with Multiple Networks and
LAN Redundancy configurations.
• When an RTM LAN-2 port card is installed on the Collaboration Server
4000, connect the LAN cable to LAN 2.
A I
DDITIONAL NFORMATION
configurations, connect the LAN cable to LAN 1.
• The RTM LAN type card is always required with Multiple Networks and
LAN Redundancy configurations.
For more information, see LAN Redundancy and Multiple Network
Services in the RealPresence Collaboration
Server(RMX)1800/2000/4000Administrator'sGuide.
RTM ISDN cards come in two versions: one-LAN port version, and four-LAN
ports version. The cabling for these two versions are different.
Connect Cables to the One-Port RTM ISDN Card of RealPresence Collabo-
ration Server (RMX) 4000
T
ASK
• To connect cables to the one-port RTM ISDN card of RealPresence
Collaboration Server (RMX) 4000:
P R
OLYCOM
: With LAN Redundancy and Multiple Network Services
: With LAN Redundancy and Multiple Network Services
P R P C
OLYCOM EAL RESENCE OLLABORATION
P C
EAL RESENCE OLLABORATION
S G S
ERVER ETTING TARTED
S .8.6
ERVER V
G
UIDE