Polycom RealPresence 1800 Getting Started Manual page 32

A E I
PPLIANCE DITION NSTALLATION
I R P
NSTALLING THE EAL RESENCE
30
C S (RMX) 2000
OLLABORATION ERVER
– Mount the RealPresence Collaboration Server on top of the rail
runners.
– Fasten the RealPresence Collaboration Server to the rack spacers
using the flat head screw
through the two holes in the RealPresence Collaboration Server
front mounting brackets.
Figure 1-7: Install the RealPresence Collaboration Server (RMX) 2000 in a rack
Figure 1-8: Install the RealPresence Collaboration Server (RMX) 4000 in a rack
Refer to Detail of front rackspacerassemblyforRealPresenceCollabo-
rationServer(RMX)2000/4000for installation instructions.
• Using a shelf
– Install the shelf, supplied by the rack manufacturer, in the rack.
– Mount the Collaboration Server unit on the shelf.
P R
OLYCOM
(item 8) with flat washer
P R P C
OLYCOM EAL RESENCE OLLABORATION
P C
EAL RESENCE OLLABORATION
(item 9)
S G S
ERVER ETTING TARTED
S .8.6
ERVER V
G
UIDE