Polycom RealPresence 1800 Getting Started Manual page 18

A E I
PPLIANCE DITION NSTALLATION
P S I
REPARE FOR YSTEM NSTALLATION
Preparing the Installation Site
Safety Requirements
Rack Mount Safety Precautions
16
This section describes the requirements your site must meet for the safe instal-
lation and operation of the system.
For your protection, please read these safety instructions completely before
operating the equipment.
• Look carefully for potential hazards in your work area: moist floors,
ungrounded power cables, frayed power cords, missing safety grounds
and so forth.
• Locate the main circuit breaker within the room.
• Locate the emergency power OFF switch within the room.
• Never assume that power is disconnected from a circuit.
• Use only the power cord supplied with the system.
• Each power cord should only be connected to a power outlet that has a
protective ground contact.
• Ensure that the power cord is easily accessible from the back of the system
at all times.
• Place the equipment in a well-ventilated area where the vents are free from
obstruction.
• Do not place heavy objects directly on top of the RealPresence Collabora-
tion Server unit.
• Do not use liquids around your equipment.
The following precautions should be followed with regards to rack mount
safety:
• Keep the area around the RealPresence Collaboration Server clean and
free of clutter.
P R
OLYCOM
P R P C
OLYCOM EAL RESENCE OLLABORATION
P C
EAL RESENCE OLLABORATION
S G S
ERVER ETTING TARTED
S .8.6
ERVER V
G
UIDE