Polycom RealPresence 1800 Getting Started Manual page 38

A E I
PPLIANCE DITION NSTALLATION
I R P
NSTALLING THE EAL RESENCE
Mounting the RealPresence Collaboration Server (RMX) 4000 in a Rack
Rack Mount Preparations
Mounting the RealPresence Collaboration Server (RMX) 2000/4000 in a 19" Rack
36
C S (RMX) 4000
OLLABORATION ERVER
Perform the following steps to mount the RealPresence Collaboration Server
(RMX) 4000 in a Rack.
• Depending on the rack installed in your site, you may need to remove the
handles if they are attached to the RealPresence Collaboration Server
(RMX) 4000.
• If the opening in the rack that is allocated to the RealPresence Collabora-
tion Server (RMX) 4000 is exactly 6U, the feet must be removed from the
RealPresence Collaboration Server (RMX) 4000 to install it in the rack.
Figure 1-12: Optional feet and handle removal
There are two methods for installing the RealPresence Collaboration Server
2000/4000 in a 19" rack:
• Using the rack rail runners on the rack
– Install the telescopic rail runners, as described in Install the Tele-
scopicRailRunnersontheRack.
P R
OLYCOM
P R P C
OLYCOM EAL RESENCE OLLABORATION
P C
EAL RESENCE OLLABORATION
S G S
ERVER ETTING TARTED
S .8.6
ERVER V
G
UIDE