Polycom RealPresence 1800 Getting Started Manual page 50

A E I
PPLIANCE DITION NSTALLATION
F E P - C
IRST NTRY OWER UP AND ONFIGURATION
Registering Product
Obtain the Activation Key
48
applied during the power-up sequence. System power-up sequence
may take up to five minutes.
4. Wait for the upload process to complete by observing following LED
status.
• Initially, ERR/RDY/ACT LEDs on the RealPresence Collaboration Server
(RMX) 2000/4000 flicker and flash.
• Upload is completed when all the LEDs turn off and only the red
ERROR/ERR LEDs on the CTNL unit of the RealPresence Collaboration
Server 2000/4000 remain ON.
• When the configuration of the Collaboration Server is completed
including the Management and IP Network Services, and if there are no
System Errors, the STATUS LED on the front panel of Collaboration
Server turns green.
• On the MPMRx card of the RealPresence Collaboration Server (RMX)
2000/4000, initially, the ERR/RDY/ACT LEDs all flicker and flash, until
only the RDY LED turns ON on the media card, while the ERR LED on the
CTNL unit is still ON. Do not remove the USB Key from the RealPresence
Collaboration Server until the connection with the MCU is established
and the Login screen of the RMX Web Client is displayed. For more
details, see Login to RealPresence Collaboration Server.
Before the Collaboration Server can be used, it is necessary to register the
product and the various software licenses, and obtain an Activation Key.
During first-time power-up, you need to enter an Activation Key.You can get
this key from Polycom Service & Support page of the Polycom website at
http://support.polycom.com.
T
ASK
1. To obtain the Activation Key:
2. Access the Service & Support page of the Polycom website at
http://support.polycom.com.
3. Log in with your email address and password or register as a new user.
4. Select Product Registration.
P R
OLYCOM
P R P C
OLYCOM EAL RESENCE OLLABORATION
P C
EAL RESENCE OLLABORATION
S G S
ERVER ETTING TARTED
S .8.6
ERVER V
G
UIDE